不得在已装置的铁艺护栏上使用灰浆和包层.为了避免污染,在穿插操作过程中,铁艺护栏应掩盖保护膜.再一次,铁栅栏被装置清洁外表,修正划痕,并保证外表光洁.

It is not allowed to use mortar and cladding on the installed iron fence. In order to avoid pollution, the iron fence should cover up the protective film during the interweaving operation. Once again, the iron fence should be cleaned, scratches corrected, and the surface should be kept smooth

工人在装置铁艺护栏前,有必要了解、和文明施工教育;施工人员有必要严格执行现场生产规章制度.施工人员进入现场时应戴帽,焊接人员有必要穿好绝缘鞋.严格遵守操作规程和一切规章制度.

It is necessary for workers to understand safety, environmental protection, and civilized construction education before installing iron guardrails; It is necessary for construction personnel to strictly follow the on-site safety production regulations. Construction personnel should wear safety helmets when entering the site, and welding personnel should wear insulated shoes. They should strictly follow the operating procedures and all safety regulations

施工前,有必要进行技术披露,不得违反规定,并遵守人员的指挥.留意一切用具,并保证它们没有被正确使用.施工现场的材料要堆积规整,日常施工中的残片要进行整理和整理,以便完成现场的整理作业.

Before construction, it is necessary to disclose safety techniques, not violate regulations, and follow the instructions of safety personnel. Pay attention to all safety equipment and ensure that they are not used correctly. The materials on the construction site should be stacked neatly, and the debris left over during daily construction should be sorted and organized to complete the on-site sorting operation

设置施工区域和危险区域的警示标志,并采纳防护措施.焊接时应特别留意,准备消防设备,焊接结束时应立即查看现场.要采纳各种有用措施,削减施工过程中发生的噪音,保证施工过程不干扰人们.

Set up warning signs for construction and hazardous areas, and take protective measures. Special attention should be paid during welding, prepare fire-fighting equipment, and immediately inspect the site after welding. Various useful measures should be taken to reduce noise during the construction process and ensure that the construction process does not interfere with people

为了保证镀层与铁制品外表之间良好的粘结力,在实施镀层(电镀)前,有必要尽可能去除铁制品外表的氧化皮、炉渣、铁锈痕迹、油脂、尘垢和水分.否则简单使镀层起泡、开裂、起皱、脱落.所谓处理是指用机械或化学或电化学办法在电镀前铁艺护栏的外表缺陷.

In order to ensure good adhesion between the coating and the surface of the iron product, it is necessary to remove as much oxide skin, slag, rust marks, grease, dirt, and moisture as possible from the surface of the iron product before implementing the coating (electroplating). Otherwise, it will simply cause the coating to bubble, crack, wrinkle, and fall off. The so-called treatment refers to using mechanical, chemical or electrochemical methods to eliminate the surface defects of the iron guardrail before electroplating

感谢您的阅读，此文的文章来源：济南铁艺护栏更多的内容和问题请点击：http://www.jnghbxg.com我们会继续努力的为您提供服务，感谢您的支持！

Thank you for reading. The source of this article is Jinan Iron Fence. For more information and questions, please click: http://www.jnghbxg.com We will continue to work hard to provide you with services. Thank you for your support!